Festool Ct Mini Dust Extractor

Serves: {{selectedOption.serves}} ({{selectedOption.costPerServ | currency}} per serve)

was save {{ selectedOption.saleSavingsPercent }}%
Bulk Item – Freight Cost POA
  • The 7.5L Festool CT MINI dust extractor is an excellent choice for both workshop and jobsite use. The flat filter maximises the amount of dust that can be held while maintaining an optimal suction rate.

  • The air flow can be adjusted dependent on the job. A three way switch is fitted, so it can be switched on or off, with the ability also to activate when a tool is used with power tools.

  • The shut-off delay means that it stays on after the tool it is being used with has been turned off, allowing that last bit of dust to be sucked up. The Hose is antistatic, so dust will not collect on it, either outside or inside clogging it up. The hose is a good length, so the vacuum is not needed to be overly close to the job, therefore getting in the way.

Scope of delivery

  • Fitted filter bag
  • Antistatic suction hose Ø 32/27mm x 3.5m long with rotating collar
  • Integrated hose garage
  • SYS-Dock with T-LOC function
  • Extractor machine


{{packitem.quantity}} x {{packitem.item.name}} {{packitem.options[0].name}}

- +

Stock Notification



- Assembly and installation work

- Low volume extraction when sanding, routing or sawing

- Final onsite clean up

- Wet and dry extraction

- Systainer transport system

- 99.95% separation efficiency at .03 microns when using a HEPA filter (sold separately)

- Extremely compact and lightweight

- Constant high suction with compact high performance turbine

- Antistatic hose function to prevent static build up during use

- Secure attachment of Systainers via Sys-Dock and T-Loc system

- Brake to keep the unit safely in place on site and in your vehicle

- Storage compartment for replacement filter bag

Write Review

Festool Ct Mini Dust Extractor Reviews

There are not yet any reviews on this product.

Subscribe to our Promotions or Specials

Sign up successful!